How to ReShape your Totobobo Mask for a perfect fit?

[Video: how to shape the Totobobo mask]

The video shows how to mould the Totobobo Mask, using hot and cold water. The hot water helps to soften the body of the mask, while the cold water helps to “freeze” the mask after moulding it to the desired shape. This method can be done over and over again until satisfaction.

The heat treatment can be applied to any parts of the mask (e.g. the chin), not only the nose area. The possibilities are limitless. You may need to try moulding the mask several times to achieve the best fit.

Moulding feature further enhances protection and comfort for the user.

Better face fitment = better protection

PM2.5, a very fine airborne particle, is smaller than 2.5 microns which can be inhaled and travel deeply into our lungs, which may then enter our bloodstream. These particles causes micro inflammation and hardens our blood vessels. Recent studies have showed that the PM2.5 not only triggers diseases in our lungs and other respiratory organs, but also triggers cardiovascular diseases and strokes. Common surgical masks or even a poor fitting N95 mask won’t be of much help due to the cunningness of the PM2.5. Ensuring a secured face fit is the first fundamental step towards respiratory protection.

Totobobo Mask have three key features for obtaining an optimal face fit.

1. Sizing : Totobobo Mask is the first and only mask that allows its user to cut to size. If you are not sure, you don’t have to risk cutting the real mask. Download this template to test the size using a paper dummy, before proceeding to cut the actual mask.
2. Fine tuning with heat moulding : The heat moulding process makes it possible for the user to fine tune the fitment of the mask. Small gaps around the nose or under the chin? No worries! Just re-mould the mask and you’ll be able to eliminate, or minimize these gaps. You can re-do this step as many times as you like! Remember to not use boiling to re-mould the mask, otherwise you’ll risk destroying the mask. Use warm to hot water around 75C instead. Another point to note, to check the seal, you should sense negative pressure when inhaling.

Visual Seal Check (VSC) : Using the transparency of the Totobobo Mask, you can check if the mask is touching the areas below the chin, forming a good deal. If the seal is not optimal, you may fine tune the cutting and moulding of the mask, or simple adjusting the position and tension of the strap to get a better fit.

Wearing Comfort

“Comfortable mask improve compliance and protection”

The heat moulding adjustment allows the mask to be moulded to fit your face snuggly. A good fit is beneficial as it not only provides a good seal, but you’ll also feel more comfortable wearing. During inhalation, the process creates a “sucking” motion due to the negative pressure, forcing air to enter through the filters. Some users described it as “The mask is breathing with me.”

Got a question? Leave us a comment or send your questions to
totobobomask (at) gmail.com