Protection & Comfort
.
Easy Seal Check
.
Light & Strong
.
UNIFit System = fitting and sealing your unique face
Poor face seal is poor protection. Over 90% of 1500 tests of N95 masks failed due to users unaware of the leaks, According to a published study by Tongji Medical College, which conducted 1500 tests with 500 N95 masks on 50 Chinese. To help identify any leaks, we developed the "water-mark" method; the frost internal surface of the mask turns into transparent when it touches wet skin. The transparent water-mark makes it easy to identify any gaps between the mask and the user's face. With Totobobo patented technology, ensuring protection and face seal is easy and accurate.
Not getting a good seal? No problem, let's warm it up with a hair dryer or hot water to ReShape the mask to make it fit better!
Is the mask too big for your kid? No worry, trim the mask to fit smaller kids (some cases down to 3 years old). You can even "test trim" with the "paper simulator".
Authoritive test reports
Frequesntly Asked Questions
More detail instructions and videos in this link
1) Apply a bit of water on the user's face with cotton wool. Make sure the area where the mask touches the face are wet. 2) Put on the mask and check the "water-mark": 3) Refer to the illustration, where the mask touches the face, the frost inner surface of the mask turns transperent. Where there is gaps between the mask and the face remains frost. 4) The mask is totally sealing the user's face if there is a continuos transparent area encirculed the nose, mouth and chin area. 5) If the transparent loop is broken, you may proceed to improve the fitting of that area by "ReShape" method shown below.
This video shows how to use hot/cold water to reshape a Totobobo mask to improve the fit, especially to eliminate gaps near to the nose bridge. Getting a good fit is key to effective respiratory protection. For airborne contamination such as virus or PM2.5, you want the air to go through the filters , not the gaps. The Totobobo mask can be mould and re-shaped many times, until you get the shape best fitting your face. Here is a short video demonstrating how to shape the mask in under one minute. (Warning: maximum temperature is 70°C, over-heat can damage the mask)
Collection of video showing how to use Totobobo mask on YouTube. Totobobo in YouTube (video)
Collection of video showing how to use Totobobo mask on the Chinese YouKu site. Totobobo in Youku (video)
A small selection of testimonials from our customers in over 50 countries